See High Speed Cutting Action at IMTS on Tornos Swiss GT13
Discover How High RPM Increases Productivity West Hall Booth #431645
Book Your Technical
Consultation With Tornos This Year At IMTS
Preview the part we’ll be machining at IMTS:
Achieve 6–10X Faster Feed Rates on Your Swiss Machine
See Air Turbine Live Tools® live at 80,000 RPM on a Tornos GT13 Swiss-type machine and meet with Tornos and Air Turbine Tools technical advisors to discuss your application at IMTS West Building, Level 3 – 431645.
With 30+ years of proven patented innovation, Air Turbine Live Tools® are built to last and are adaptable for any application on your Tornos swiss lathe. Completely sealed for wet environments and with outside diameters available at Ø 19.05, 20, 22 or 25 mm to fit into your boring bar holder.
Faster Production with a Finer Finish using High Speed Air Turbine Live Tools®
Operate With Governed High
Speed and No Duty Cycle
Air Turbine Live Tools® run at high fixed speeds and can operate on any Tornos swiss lathe without changing your RPM. Simply change your feed rate to get your desired chip load and get the proper surface footage for micro tooling. Maintain constant high speed in cut with the SFM required to optimize your micro tools. At 80,000 RPM Air Turbine Live Tools® increase feed rates 6 – 10x.
Speed up your off-center cuts and exponentially increase production from your lathes. You can machine titanium and steel – our patented governor increases air flow on demand keeping you at high speed on the toolpath.
No Heat, No Thermal Effects on Accuracy
Achieve finer finished surfaces with no feed lines with 2 μm precision. Our technology is very different from nominal high speed spindles that drop on tool engagement.
Easy Installation
We eliminate the control box, wiring, high frequency brushes and programming complexity. There’s no oil lubrication either. Quicker and simpler installation than traditional live tool spindles. Just drop Air Turbine Live Tools® into your Tornos boring bar holder and connect 90 psi/6.2 bar dry compressed air.
Multiple Diameter Options To Easily Mount Into Your Lathe
Videos
"There's nothing else out there for the customer to get his Spindle speed speeded up" - Tornos
Keep up with Production Pressure with 80,000 RPM Air Turbine Live Tools®
Live Tooling at 60,000 / 80,000 RPM on your Swiss or Sliding Head Stock Lathe: Interview with MTDCNC
Service & Support
Support is always available from our technical team in the USA and Germany. Repair Service is available in Florida and Munich. Call our factory technicians at +1-561-994-0500 or email us at [email protected].
