525XSVE
Straight Hand Tool Series
1/4” / 6 mm Capacity
Reach deep cavities! The 525XSVE delivers double turbine power combined with lightweight, low vibration, low noise for operator comfort. The 525XSVE also provides greater accuracy and a finer high quality finish.
The constant high speed 525XSVE enables you to work on hard-to-reach applications for fast removal or finishing – comfortably with a light touch directing the tool. At up to 0.8 HP (0.6 kW) high speed cutting action on your work piece is assured. Patented automatic brake option stops this tool in seconds.
$ 850.00
| 525XSVE Specifications | |
| Speed | 30,000 RPM |
| Power Rating | 0.8 HP (0.6 kW) |
| Inlet Air Pressure | 90 psi (6.2 bar) |
| Air Consumption Idle | 19 CFM (8.97 L/s) |
| Air Consumption Working Flow | 22 CFM - 30 CFM (10.38 L/s - 14.16 L/s) |
| Air Hoses and Fittings Minimum Size | 8 mm internal diameter |
| Sound Level | Less Than 67 dBA |
| Max Shank Capacity | 1/4” (6 mm) |
| Hand Tool Weight | 27.9 oz (0.79 kg) |
| 525XSVE Specifications |
| Speed |
| Power Rating |
| Inlet Air Pressure |
| Air Consumption Idle |
| Air Consumption Working Flow |
| Air Hoses and Fittings Minimum Size |
| Sound Level |
| Max Shank Capacity |
| Hand Tool Weight |
| 30,000 RPM |
| 0.8 HP (0.6 kW) |
| 90 psi (6.2 bar) |
| 19 CFM (8.97 L/s) |
| 22 CFM - 30 CFM (10.38 L/s - 14.16 L/s) |
| 8 mm internal diameter |
| Less Than 67 dBA |
| 1/4” (6 mm) |
| 15.5 oz (0.44 kg) |
These Air Tools Cut Steel and Stress
| 525XSVE Vibration Statistics | |
| Time to reach EAV 2.5 m/s² A(8) | 12 hours, 32 minutes |
| Time to reach ELV 5 m/s² A(8) | 50 hours, 8 minutes |
| Vibration magnitude m/s² r.m.s | 2.00 |
Don't Sacrifice Comfort and Safety for Performance!
Solve problems in hand operations with revolutionary Air Turbine Tools®. Reduce injury risk and repetitive stress on your hands and arm, and eliminate limitations on working time.
EAV = Time to reach Exposure Action Value
ELV = Exposure Limit Value
525XSVE Dimensions
All fittings, couplings, and hoses must have a minimum of 8 mm internal diameter.
| 525XSVE Dimensions | |||||
| A | 2.5” (63.5 mm) | B | 10.46" (265.68 mm) | C | Ø 1.00" (25.4 mm) |
| 525XSVE Dimensions | |
| A | 2.5” (63.5 mm) |
| B | 10.46" (265.68 mm) |
| C | Ø 1.00" (25.4 mm) |
Equipment
Included Equipment
Standard Equipment
1/4” or 6 mm collet standard. Other sizes are available. Oil-free 90 psi / 6.2 bar clean, dry air supply required.
A 0.3 micron filter/regulator/extractor combination is a highly recommended accessory to operate Air Turbine Tools® to eliminate all impurities in your air supply.
| 525XSV Accessories | |
|---|---|
| Model | Part Number |
| High Flow Filter | 30004 |
| High Flow Filter / Regulator | 30003 |
| High Flow Filter / Regulator / Extractor | 30008 |
| 5’ Air Supply Assembly w/Fitting for SV Models | 30020 |
| 525XSVE Part Numbers | |||
|---|---|---|---|
| Governed Speed | Optional Brake | 1/4" Part Numbers | 6 mm Part Numbers |
| 30,000 RPM | Optional Brake | 42560 | 42561 |
| Does Not Include Brake | 42562 | 42563 | |
Service & Support
Support is always available from our technical team in the USA and Germany. Repair Service is available in Florida and Munich. Call our factory technicians at +1-561-994-0500 or email us at [email protected].
