650JS
650 CNC Spindle Series
The 650JS (3/4” / 20mm Straight Shank) delivers governed constant high speeds under load – 25,000 to 40,000 rpm, < 0.88 hp (0.66 kW). Robust and reliable, with double front ceramic bearings, the 650 Series is ideal for heavier duty applications and milling hard materials in corners. The governor-controlled turbine maintains rated high speed, optimizing tool performance and life. Effective in all materials, including tool steel, titanium, and ceramic. Ultra-low vibration and no heat in 24/7 operation. Selectable rear or side air feed on each spindle. Automatic Loading from the magazine on all machines.
650JS Specifications | |||
Speed RPM | 25,000 | 30,000 | 40,000 |
Power Rating hp (Kw) | 0.80 (0.60) | 0.83 (0.62) | 0.88 (0.66) |
Inlet Air Pressure | 90 PSI (6.2 Bar) | ||
Air Consumption Idle cfm (l/s) | 13 (6.1) | 14 (6.6) | 14 (6.6) |
Air Consumption Working Flow (l/s) | 14 (6.60) - 35 (16.5) | ||
Sound Level | Less Than 78 dBA | ||
Max Shank Capacity | ER 11 - 1/4” (6mm) | ||
Spindle Weight | 65.8 oz (1.95 kg) |
650JS Dimensions
All fittings, couplings, and hoses must have a minimum of 8mm internal diameter.
650JS Dimensions | |
A | 0.87” (22mm) |
B | 3.23” (82mm) |
C | 5.79” (147mm) |
D | 7.76” (197mm) |
E | 1.62" (41mm) |
Equipment
Included Equipment
Standard Equipment
ER 11 UP Collet System (1/4” or 6mm collet). 3/4” or 20mm shank standard (Metric Shank comes with metric collet, Inch Shank with inch collet). Oil-free 90 psi / 6.2 bar, clean, dry air supply required.
Accessories Models | Part # |
---|---|
High Flow Filter / Regulator / Extractor | 30008 |
Tube 12mm O.D. - 8mm I.D. (order by foot) | 16509 |
Hose & Fitting - 12mm O.D. - 8mm I.D. - 12’ | 30045 |
ER11- 1/4" | ER11- 6mm | ||
---|---|---|---|
Speed RPM | Part # | Speed RPM | Part # |
25,000 | 63030 | 25,000 | 63031 |
30,000 | 63032 | 30,000 | 63033 |
40,000 | 63034 | 40,000 | 63035 |
Videos
50,000 RPM CNC Spindle Creates the Perfect Chocolate Mold at HAAS Allendale
Watch Chips Fly with this Air Turbine Tools® CNC Milling Spindle
40,000 RPM CNC Spindle Milling Aluminum on DMC125 U DuoBlock
CNC Milling Spindle Runs at 1850 mm/min with 40,000 RPM
CNC Spindle Milling and Drilling Aluminum at 40,000 rpm on Mikron CNC
5th Axis Cutting at 40,000 RPM / 150IPM on Haas UMC500 by Air Turbine Spindles®
Service & Support
Support is always available from our technical team in the USA and Germany. Repair Service is available in Florida and Munich. Call our factory technicians at +1-561-994-0500 or email us at [email protected].