Search Results

Operating at governed 40,000 RPM – 90,000 RPM, <0.2 HP (0.15 kW). The 601JS patented governor increases air flow volume to match cutting load maintaining rated high speed in cut. Get the required high SFM for small tools, 6-10x faster cycles and with 2 micron ultra precision to make the exact cuts you need. The…

The 601 series achieves the SFM you need for small tools with governed constant 40,000 to 90,000 RPM, with up to 0.2 HP (0.15 kW) in power. This compact spindle has a 50 mm extended barrel, allowing for close workpiece operations or for work on machines with a short z-axis travel.

The 202HD is one of the most popular models of Air Turbine Motors®. Compact and powerful, this air powered motor can be rigidly fixture mounted with its long steel barrel to be used in many applications. When installing and operating your 202HD, follow these 12 golden rules to avoid problems, premature failure and ensure successful operation.

Keep up with production pressure with Air Turbine Live Tools®. Air Turbine Live Tools® run at high fixed speeds and can operate on any lathe without changing your RPM. Simply change your feed rate to get your desired chip load and get the proper surface footage for micro tooling.

At 65,000 RPM the 822MX keeps high speed under load. This compact low vibration live tool spindle operates 24/7 with low heat and has just 2 moving parts and no gears, vanes, or high frequency brushes to burn up. Drop in the 822MX to accelerate your production and increase your productivity. Ideal for lathes, swiss…

At 65,000 RPM the 820MX keeps high speed under load. This compact low vibration live tool spindle operates 24/7 with low heat and has just 2 moving parts and no gears, vanes, or high frequency brushes to burn up. Drop in the 820MX to accelerate your production and increase your productivity. Ideal for lathes, swiss…

Medical, aviation, and metalworking industries increase productivity, dropping the 822CX into automatic lathes. These sliding headstock lathes operate 7 days a week under enormous cost and time pressure. Economic production success depends on the speed and reliability of motor drive, but the outdated motor technology has restricted productivity and resulted in high costs. The 822CX…

Increase the power on your lathe by dropping in the Integrated MX Series to accelerate your production and increase your productivity. Cut with precision with Air Turbine Live Tools® do not get hot or vibrate. The air cools the sealed grease-packed bearings. The result is durability in 24/7 operation with no maintenance and no control…

An overview of every series of Air Turbine Live Tools®. No need to worry about a control box or wiring as Air Turbine Live Tools® are air powered. Just drop them into your boring bard holder and connect 90 psi/ 6.2 dry compressed air.

These miniature live tool spindles are easy to install. No need to worry about a control box or wiring as Air Turbine Live Tools® are air powered. Just drop them into your boring bard holder and connect 90 psi/ 6.2 dry compressed air.