800LT & 800CYL

Swiss Lathe Series

Medical, aviation, and metalworking industries increase productivity dropping the 800 into Swiss-type Automatic Lathes. These sliding headstock lathes operate 7 days a week under enormous cost and time pressure. Economic production success depends on the speed and reliability of motor drive but the outdated motor technology has restricted productivity and resulted in high costs. The 800 operates 24/7 at 60,000/80,000 rpm accelerating your production rate. This powerful patented motor has a governor which maintains your rated speed in the cut. Air Turbine Motors® are low friction direct drives with only 2 moving parts resulting in no heat and great reliability at high speed. Just connect 90 PSI, 6.2 Bar dry clean air supply, and mill on any Swiss Automatic. No control system, no lubricator, no gears or high frequency brushes to burn up.

19.5, 20, 22, and 25mm Outside Diameters Available to fit most Swiss Automatics. Specify brand and OD when ordering.

ER8- 1/8″ ER8- 3mm
Speed RPM Model Part # Speed RPM Model Part #
60,000 800LT 80002 60,000 800LT 80003
800CYL 80012 800CYL 80013
80,000 800LT 80006 80,000 800LT 80007
800CYL 80016 800CYL 80017

Speed RPM 60,000/80,000
Power Rating hp (Kw) 0.2 (0.15)
Inlet Air Pressure

90 PSI (6.2 Bar)
Air Consumption Idle cfm (l/s) 3.5
Air Consumption Working Flow (l/s) 5
Sound Level Less Than 78 dBA
Max Shank Capacity ER 8-1/8″(3mm)
Motor Weight 5.6 oz (0.158 kg)

800LT Dimensions

800LT

A Ø .47″ (11.9mm)
B .57″ (14.78mm)
C 1.56″ (39.6mm)
D 3.34″ (84.83mm)
E 1″ (25.4mm)
F Ø .75″ (19mm)
G .30″ (7.6mm) TYP (2)
H Ø .17″ (4.3mm) THRU, ⌴ Ø .29″ (7.3mm) ↧ .16″ (4mm) TYP (2)
I .51″ (12.9mm) TYP (2)

800CYL Dimensions

800CYL

A Ø .472″ (12.0mm)
B .57″ (14.5mm)
C 1.56″ (39.6mm)
D 1.5″ (38.1mm)
E 3.05″ (77.6mm)
F 3.65″ (92.8mm)
G .866″ (25.0mm)
H Ø .17″ (22.0mm)

Model Part #
Low Flow Filter / Regulator 30001
Tube 8mm O.D. – 5mm I.D. (order by foot) 16506
Hose & Fitting – 8mm O.D. – 5mm I.D. – 12’ 30041

Combo filter extractor regulator (p/n #30001), collet, wrenches, hose and fittings, plug (for alternate air inlet not in use), and carrying case. ER, 8 UP collet system (1/8” or 3mm collet standard – other sizes optional). The 800LT is for use with tools up to 0.5mm, 0.02”. Oil-free 90 psi / 6.2 bar clean, dry air supply required.

Service & Support

Support is always available from our technical team in the USA, Germany and Mexico. Repair Service is available in Florida and Munich.

Call our factory technicians at +1-561-994-0500 or email us at [email protected].